Default Pod Security Policies

This document describes how RKE2 configures PodSecurityPolicies and NetworkPolicies in order to be secure-by-default while also providing operators with maximum configuration flexibility.

Version Gate

This document applies to RKE2 v1.24 and older, please refer to the Pod Security Standards Documentation for the default policy information for RKE2 v1.25 and higher.

Pod Security Policies

RKE2 can be ran with or without the profile: cis-1.6 configuration parameter. This will cause it to apply different PodSecurityPolicies (PSPs) at start-up.

If running with the cis-1.6 profile, RKE2 will apply a restrictive policy called global-restricted-psp to all namespaces except kube-system. The kube-system namespace needs a less restrictive policy named system-unrestricted-psp in order to launch critical components.
If running without the cis-1.6 profile, RKE2 will apply a completely unrestricted policy called global-unrestricted-psp, which is the equivalent of running without the PSP admission controller enabled.

RKE2 will put these policies in place upon initial startup, but will not modify them after that, unless explicitly triggered by the cluster operator as described below. This is to allow the operator to fully control the PSPs without RKE2's defaults adding interference.

The creation and application of the PSPs are controlled by the presence or absence of certain annotations on the kube-system namespace. These map directly to the PSPs which can be created and are:

psp.rke2.io/global-restricted
psp.rke2.io/system-unrestricted
psp.rke2.io/global-unrestricted

The following logic is performed at startup for the policies and their annotations:

If the annotation exists, RKE2 continues without further action.
If the annotation doesn't exist, RKE2 checks to see if the associated policy exists and if so, deletes and recreates it, along with adding the annotation to the namespace.
In the case of the global-unrestricted-psp, the policy is not recreated. This is to account for moving between CIS and non-CIS modes without making the cluster less secure.
At the time of creating a policy, cluster roles and cluster role bindings are also created to ensure the appropriate policies are put into use by default.

So, after the initial start-up, operators can modify or delete RKE2's policies and RKE2 will respect those changes. Additionally, to "reset" a policy, an operator just needs to delete the associated annotation from the kube-system namespace and restart RKE2.

The policies are outlined below, starting with the most restrictive global-restricted PSP.

apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: global-restricted-psp
spec:
  privileged: false                # CIS - 5.2.1
  allowPrivilegeEscalation: false  # CIS - 5.2.5
  requiredDropCapabilities:        # CIS - 5.2.7/8/9
    - ALL
  volumes:
    - 'configMap'
    - 'emptyDir'
    - 'projected'
    - 'secret'
    - 'downwardAPI'
    - 'persistentVolumeClaim'
  hostNetwork: false               # CIS - 5.2.4
  hostIPC: false                   # CIS - 5.2.3
  hostPID: false                   # CIS - 5.2.2
  runAsUser:
    rule: 'MustRunAsNonRoot'       # CIS - 5.2.6
  seLinux:
    rule: 'RunAsAny'
  supplementalGroups:
    rule: 'MustRunAs'
    ranges:
      - min: 1
        max: 65535
  fsGroup:
    rule: 'MustRunAs'
    ranges:
      - min: 1
        max: 65535
  readOnlyRootFilesystem: false

If RKE2 is started in non CIS mode, annotations are checked like above however the resulting application of pod security policies is a permissive one. See below.

apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: global-unrestricted-psp
spec:
  privileged: true
  allowPrivilegeEscalation: true
  allowedCapabilities:
  - '*'
  volumes:
  - '*'
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  hostIPC: true
  hostPID: true
  runAsUser:
    rule: 'RunAsAny'
  seLinux:
    rule: 'RunAsAny'
  supplementalGroups:
    rule: 'RunAsAny'
  fsGroup:
    rule: 'RunAsAny'

In both cases, the "system unrestricted policy" is applied. See below.

apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: system-unrestricted-psp
spec:
  privileged: true
  allowPrivilegeEscalation: true
  allowedCapabilities:
  - '*'
  volumes:
  - '*'
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  hostIPC: true
  hostPID: true
  runAsUser:
    rule: 'RunAsAny'
  seLinux:
    rule: 'RunAsAny'
  supplementalGroups:
    rule: 'RunAsAny'
  fsGroup:
    rule: 'RunAsAny'

To view the pod security policies currently deployed on your system, run the below command:

kubectl get psp -A

Network Policies

When RKE2 is run with the profile: cis-1.6 parameter, it will apply 2 network policies to the kube-system, kube-public, and default namespaces and applies associated annotations. The same logic applies to these policies and annotations as the PSPs. On start, the annotations for each namespace are checked for existence and if they exist, RKE2 takes no action. If the annotation doesn't exist, RKE2 checks to see if the policy exists and if it does, recreates it.

The first policy applied is to restrict network traffic to only the namespace itself. See below.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  managedFields:
  - apiVersion: networking.k8s.io/v1
    fieldsType: FieldsV1
    fieldsV1:
      f:spec:
        f:ingress: {}
        f:policyTypes: {}
  name: default-network-policy
  namespace: default
spec:
  ingress:
  - from:
    - podSelector: {}
  podSelector: {}
  policyTypes:
  - Ingress

The second policy applied is to the kube-system namespace and allows for DNS traffic. See below.

apiVersion: networking.k8s.io/v1
kind: NetworkPolicy
metadata:
  managedFields:
  - apiVersion: networking.k8s.io/v1
    fieldsV1:
      f:spec:
        f:ingress: {}
        f:podSelector:
          f:matchLabels:
        f:policyTypes: {}
  name: default-network-dns-policy
  namespace: kube-system
spec:
  ingress:
  - ports:
    - port: 53
      protocol: TCP
    - port: 53
      protocol: UDP
  podSelector:
    matchLabels:
  policyTypes:
  - Ingress

RKE2 applies the default-network-policy policy and np.rke2.io annotation to all built-in namespaces. The kube-system namespace additionally gets the default-network-dns-policy policy and np.rke2.io/dns annotation applied to it.

To view the network policies currently deployed on your system, run the below command:

kubectl get networkpolicies -A

Pod Security Policies​

Network Policies​

Pod Security Policies

Network Policies